1Feb

Today re-wired the TX and epoxied the wires so they don't fall out again.
Hooked up the video equipment and got it running!

TX above, channel 8 takes 12 V consumes 450 mA while operating

CCD Camera hooked up to the TX, takes 12V 90 mA while operating

Complete testing rig with power supplies

Receiver has dedicated power supply 5V

 TV with video feed from other room

Going to start testing with the battery power supply with the camera and TX

Want to get the camera and TX off the plug in power supplies and on a battery

Also going to range check camera